Ramset Powder Fasteners Selection Chart

	About Ramset \| P.A.T. Licensing \| Contact Us

or go to the Advance Search

Powder Fasteners

DESCRIPTION
We maintain only the highest standards in the materials, production techniques and quality control measures used to manufacture our fasteners, assuring consistent, optimum quality in every fastener.
FASTENER TERMINOLOGY SUFFIX K = Knurled B = Black C = 100 count M =1000 count X = Collated SD = Washer E = Ramguard

ADVANTAGES

BLACK PINS
The special black coating improves pin penetration into difficult base material (i.e. hard concrete). We offer this black coating on all of our fasteners manufactured for the attachment of drywall track and channel to concrete and steel.

PINS
ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.

Selection Charts

BLACK
TRACK PINS

Designed for use in concrete and structural steel applications

AVAILABLE IN 100-PACK OR 1000-PACK PER BOX.

PART
NUMBER

SHANK LENGTH
IN. (MM)

721

AUTO
FAST

D60

SA270

Rocket/
D45A

COBRA

RS22/
HD22

1506B

3/4

(19.1)

Shank diameter = .145 Head diameter = .300

DRIVE PINS		Designed for use in concrete and structural steel applications

AVAILABLE IN 100-PACK OR 1000-PACK PER BOX.
		PART NUMBER	SHANK LENGTH IN. (MM)		721	AUTO FAST	D60	SA270	Rocket/ D45A	COBRA	RS22/ HD22
	\|	1503K	1/2 Knurled	(12.7)
	\|	1506	3/4	(19.1)
	\|	1508	1	(25.4)
	\|	1510	1-1/4	(31.8)
	\|	1512	1-1/2	(38.1)
	\|	1514	2	(50.8)
	\|	1516	2-1/2	(63.5)
	\|	1524	3	(76.2)
		Shank diameter = .145 Head diameter = .300

COLLATED POWDER ACTUATED DRIVE PINS		Designed for high volume repetitive fastenings to concrete and steel

FASTENERS COLLATED 10 PER STRIP. 100 STRIPS PER BOX.
		PART NUMBER	SHANK LENGTH IN. (MM)
	\|	SP58X	5/8	(15.9)	Fits many competitive powder actuated tools with fastener magazines
	\|	1506X	3/4	(19.1)
	\|	1510X	1-1/4	(31.8)
		Shank diameter = .145, SP58X=.150
		Head diameter = .300

DRIVE PINS
WITH WASHER

Washer increases bearing surface against the material to be fastened

100 PER BOX. 16 GAGE METAL WASHER

PART
NUMBER

SHANK LENGTH
IN. (MM)

721

AUTO
FAST

D60

SA270

Rocket/
D45A

COBRA

RS22/
HD22

1506SD

3/4

(19.1)

1508SD

(25.4)

1510SD

1-1/4

(31.8)

1512SD

1-1/2

(38.1)

1514SD

(50.8)

1516SDC

2-1/2

(63.5)

1524SDP*

(76.2)

Shank diameter = .145 Head diameter = .300

*Square washer indicates 3" pin has been installed

POWERPOINT PINS

Used for fastening into harder steel and concrete. Premium steel and hard concrete pin

100 PER BOX.

PART
NUMBER

SHANK LENGTH
IN. (MM)

721

AUTO
FAST

D60

SA270

Rocket/
D45A

COBRA

RS22/
HD22

SP12

1/2

(12.7)

SP58

5/8

(15.9)

SP34

3/4

(19.1)

Shank diameter = .150 Head diameter = .300

POWERPOINT STEP SHANK PINS

Used for fastening into harder steel and concrete. Premium steel and hard concrete pin

PIN FOR FASTENING INTO HARDER STEEL AND CONCRETE. 100 PER BOX.

PART
NUMBER

SHANK LENGTH
IN. (MM)

AUTO
FAST

D60

SA270

Rocket/
D45A

COBRA

RS22/
HD22

SP100

(25.4)

SP114

1-1/4

(31.8)

SP112

1-1/2

(38.1)

SP178

1-7/8

(47.6)

Shank diameter = .150/.180 Head diameter = .300

TOP HAT
DRIVE PINS

Increases bearing surface against material to be fastened for improved attachment to inconsistent base materials.

AVAILABLE IN 100 PER BOX.

PART
NUMBER

SHANK LENGTH
IN. (MM)

721

AUTO
FAST

D60

SA270

Rocket/
D45A

COBRA

RS22/
HD22

SP58TH

5/8

(15.9)

SP34TH

3/4

(19.1)

1906

3/4

(19.1)

1908

(25.4)

Shank diameter = .145 (SP58TH = .150) Head diameter = 8mm (SP58TH = .300)

RAMGUARD PINS

Designed for use in treated lumber applications.

1000 PER BOX.

PART
NUMBER

SHANK LENGTH
IN. (MM)

AUTO
FAST

D60

SA270

D45A

COBRA

RS22/
HD22

1516E

2-1/2

(63.5)

1524E

(76.2)

1516SDE

2-1/2

(63.5)

1524SDE*

(76.2)

SP178E

1-7/8

(47.6)

Shank diameter = .145 Head diameter = .300
*Square washer indicates 3" pin has been installed

THREADED STUD

For applications that require removability or where shimming is required.

1/4-20 THREADED STUD. 100 PER BOX.

PART
NUMBER

THREAD
LENGTH
IN. (MM)

SHANK
LENGTH
IN. (MM)

721

AUTO
FAST

D45A
D60

Rocket/
SA270

COBRA

RS22/
HD22

VIPER

1623WK

3/4

(19.1)

1/2
Knurled

(12.7)

1643W

3/4

(19.1)

(25.4)

Shank diameter = .145

Use 1623WK for Steel Base Materials

Use 1643W for Concrete Base Materials

THREADED STUD		For applications that require removability or where shimming is required.

3/8-16 THREADED STUD. 100 PER BOX. FM APPROVED.
		PART NUMBER	THREAD LENGTH IN. (MM)		SHANK LENGTH IN. (MM)		MD380
	\|	9190	1	(25.4)	1-1/4	(31.8)		Fits many competitive 3/8 drive powder tools

		Shank diameter = .205

CEILING CLIP ASSEMBLIES		Designed for suspended ceilings and other overhead applications

PIN PREASSEMBLED TO A 14 GAGE ANGLE CLIP. 1000 PER BOX.
		PART NUMBER	PIN LENGTH IN. (MM)		721	AUTO FAST	D45A D60	Rocket/ SA270	COBRA	RS22/ HD22	VIPER
	\|	SDC100	1	(25.4)
	\|	SDC125*	1-1/4	(31.8)
	*Available in 100-Pack (part number SDC125C)
	Shank diameter = .145 Head diameter = .300

POWERPOINT PINS WITH CEILING CLIPS		Designed for difficult overhead applications

PIN PREASSEMBLED TO A 14 GAGE ANGLE CLIP. 1000 PER BOX.
		PART NUMBER	PIN LENGTH IN. (MM)		721	AUTO FAST	D45A D60	Rocket/ SA270	COBRA	RS22/ HD22	VIPER
	\|	SPC78	7/8	(22.2)
	\|	SPC114	1-1/4	(31.8)
	Shank diameter SP78 = .150, SPC114 = .150/.180 Head diameter = .300

LADD
ASSEMBLY
FOR L1600

Used exclusively with the L1600 for excellent holding values

13 GAGE ANGLE CLIP. 100 CLIPS PER BOX.

PART
NUMBER

DESCRIPTION

L1600

L652

1-1/4" Preassembled pin and clip

Shank diameter = .152 Head diameter = .300

FASTENER ANGLE CLIP		General purpose 3/4" wide angle clip

14 GAGE ANGLE CLIP. 100 PER BOX.
		PART NUMBER	DESCRIPTION
	\|	1202CF	Angle clip (no pin)

	Hole diameter: 5/16" & 13/64"

INSULATION WASHER

1-7/16" METAL WASHER, 22 GAGE. 100 PER BOX.
		PART NUMBER	DESCRIPTION
	\|	IW	Insulation washer (no pin)

Return to Ramset Powder Fastening Systems

Fasteners | Performance/Submittals | Accessories | Approval and Listings